Getting Started

Introductions

The Bluetooth Slipper™ for GPS receiver is a Bluetooth cradle or docking station of the GPS receiver to transfer the GPS data wirelessly to the host devices, like, notebookPC, PocketPC, Smart Phone, TabletPC, etc. Simply insert the CompactFlash™ interface of the multi-mode foldable GPS receiver into the Bluetooth Slipper™, the two units become a Bluetooth GPS receiver while the GPS receiver receiving the satellites signal and the Bluetooth transmit the GPS data to the mobile device. It'll be a perfect tool for all kinds of global positioning applications, such as, in car, marine, aviation navigation, outdoor activities, places finding, etc. without the wire allover.

Bluetooth Slipper™ Advantages:

1. Modulize concept: The multi-mode foldable GPS receiver can be used independently. (please see user manual for the multi-mode foldable GPS receiver)
   
2. Place on right place: The metal plate on the bottom of the Bluetooth Slipper™ can be attached to the car holder with magnetic. The Bluetooth GPS receiver can be either placed on the back window of the car or on the front windshield Or, with belt clipper, user can clip the BTSlipper on the belt and get the best satellite reception in best angel.
   
3. Switchless design: To turn on the Bluetooth Slipper™, simply insert and connect the CompactFlash™ part into the CF™ slot and turn off by disconnect the CF™ interface from the CF slot.
   
4. Changeable battery: User can change the spare battery like mobile phone without interruptting the GPS positioning.
   
5. Multi-function Connector: The function of the mini-1394 connector on the side are: a) Charging the battery in the Bluetooth Slipper™, b) Solar panel power add, c) Data Logger module.
   
6. Adjustable GPS antenna: The multi-mode foldable GPS receiver on the Bluetooth Slipper™ can be adjusted in different angle to get the best satellite receptions.
   
7. Long Lasting Battery: It lasts more than 8 hours for the standard battery. With the solar panel add, the battery can stay active for more than 12 hours depend on the sunlight.

Bluetooth Slipper™ with Multi-Mode Foldable GPS receiver:

PACKAGING:

The standard package of the Bluetooth Slipper™ with Multi-Mode Foldable GPS receiver including:

Standard Packaging:

System Specifications:

Bluetooth Slipper Specifications:
Bluetooth V1.1 Compliances

Frequency Range:	2.4 ~ 2.4835 GHz unlicensed ISM band
Interface:	USB/UART/SPI
Receiver Sensetivity:	-80 dBm @ 0.1% BER
Transmitting Power:	Class 2 -6 dBm ~ +4 dBm
RF Input Impedance:	50 ohms
Frequency hopping:	1600hops/sec.
Baseband Crystal OSC:	16MHz
Data Rate:	Up to 723Kb/s
Operating Temperature:	-20 C ~ +80 C
Storage Temperature:	-30 C ~ +90 C
Supply Voltage:	Build-in Rechargeable Bettery (3.7V 1500mAh)
Operation Time:	8 hrs after fully charged in continue mode
Transmitting Range:	10 meters (Typical)
Power Consumption:	45 mA (Typical)

Optional Accessories:

MMCX External Antenna - ATN-MMC
(for theMulti-Mode Foldable GPS receiver)